Differential pressure switch 908 adjustable

Product Details:

Display Without display
Grade Industrial
Sensor Type Diaphragm type
Seal Material Nitrile rubber or EPDM
Thread 1/4 BSP (F)
Outer Size Approx. 110mm x 70mm x 95mm
Material Aluminum enclosure, SS304 wetted parts
Share Your Product:

Get a Price/Quote

Request To Call Back Send Inquiry

Differential pressure switch 908 adjustable Product Specifications

Display Without display
Grade Industrial
Scale Range Adjustable 8-140 mbar (or as per model variant)
Accuracy 2% of F.S.
Accessories Mounting screws, instruction manual
Diameter Approx. 70 mm body
Sensor Type Diaphragm type
Seal Material Nitrile rubber or EPDM
Processing Type Pressure die-cast body
Material Aluminum enclosure, SS304 wetted parts
Measure Pressure Of Air, Non-corrosive gases
Thread 1/4 BSP (F)
Finishing Powder coated/Anodized
Outer Size Approx. 110mm x 70mm x 95mm
Mount Type Panel or Surface mount

Weight Approx. 0.6 kg
Repeatability 1% of set point
Ambient Temperature Range -20°C to +85°C
Electrical Rating 10A, 250V AC (SPDT switch)
Pressure Connection Two connections for high and low pressure
Contact Type Micro switch, snap action
Switching Element Single pole double throw (SPDT)
Ingress Protection IP65 rated
Set Point Adjustment External screw adjustment
Media Temperature Range -10°C to +60°C

Product Description

Application :

Differential pressure monitoring in e.g. hot water circuit

Technical Data :

Setting ranges:

Type Factory-set switching points between Maximum operating pressure

908.32 40 and 200 mbar 10 bar

908.34 150 and 1000 mbar 10 bar

Temperature range:
Ambient temperature from -10 to +80°C
Temperatrure of media from -10 to +80°C
Storage temperature from -40 to +80°C

Diaphragm material:
EPDM / NBR / Viton / Silikon

Pressure connection:
Inner thread G 1/8 of brass

Electrical rating:
Standard version:
max. 6 (1,5) A / 250 VAC
max. 10 (2,0) A / 250 VAC
Low power version:
max. 100 mA / 24 VAC
max. 30 mA / 24 VDC

Electrical connection:
flat plug 6.3 x 0.8 mm according to DIN 46244

Protection class:
IP54 / IP65 depending on the used protection cap. IP00 without protection cap.

Accurate and Reliable Pressure Monitoring

The Differential Pressure Switch 908 is purpose-built for precise pressure detection in air and non-corrosive gases. Its diaphragm sensor design delivers repeatable results, with 1% repeatability and 2% F.S. accuracy, making it a reliable choice for industrial environments that demand consistency and safety.

Versatile Installation and Adjustment

Featuring an external screw for set-point adjustment, this switch provides easy calibration without removing or opening the unit. Designed for both panel and surface mount installation, it adapts seamlessly to varied system setups, while included accessories ensure straightforward mounting.

FAQ's of Differential pressure switch 908 adjustable:

Q: How do I adjust the set point on the Differential Pressure Switch 908?

A: You can adjust the set point externally using the dedicated screw adjustment provided on the device. This allows for precise setting of the pressure range without needing to open the switch enclosure.

Q: What media can this differential pressure switch measure?

A: The 908 differential pressure switch is designed to measure the pressure of air and non-corrosive gases only. It is not suitable for corrosive media or liquids.

Q: When is this switch typically used in industrial applications?

A: It is commonly employed in HVAC systems, air filters, and duct monitoring, protecting equipment and ensuring operational safety when monitoring pressure differentials is crucial.

Q: Where can the switch be mounted?

A: This switch supports both panel and surface mounting, providing flexibility for integration into control panels or on-site installations as required by your application.

Q: What are the advantages of the IP65-rated enclosure?

A: The IP65 rating protects internal components against dust and water ingress, ensuring long-term reliability even in harsh industrial environments.

Q: How does the SPDT micro switch benefit my system?

A: The SPDT (single pole double throw) micro switch delivers reliable snap action, supporting both normally open and normally closed circuits for flexible system integration and dependable operational feedback.

Tell us about your requirement

Price:

Quantity

Select Unit

50
100
200
250
500
1000+

Additional detail

Mobile number

Other Products in 'Differential Presure Switch' category

Differential pressure switch 930 EX adjustable Accuracy : 1.5% FS Scale Range : Adjustable 20 3000 Pa Grade : Industrial, Explosion Proof Display : Dial Analog Material : Other, Aluminum Die Cast Housing Processing Type : Other, Explosion Protected (Ex d llB T6) Seal Material : Silicone Rubber Sensor Type : Differential Pressure Sensor Accessories : Mounting Screws, Operation Manual Measure Pressure Of : Other, Gas, Air (Noncorrosive Media) Mount Type : Other, Wall/Surface Mount Outer Size : 116 x 98 x 55 mm Finishing : Other, Powder Coated, AntiCorrosive Thread : 1/4 BSP (standard) Diameter : Approx. 98 mm (dial size) Pointer Material : Other, Black Aluminum Dial Material : Other, Aluminum/Plastic

Send Inquiry

Differential pressure switch 911.82 factory-set Accuracy : 2% of full scale Scale Range : 0.5 to 8 bar (factory set point within this range) Grade : Industrial Grade Display : Analog Material : Other, Die Cast Aluminium Housing Processing Type : Other, Factoryset / Precalibrated Seal Material : NBR (Nitrile Rubber) Sensor Type : Diaphragm Sensor Accessories : Mounting screws, terminal covers Measure Pressure Of : Other, Air, Gases, or Noncorrosive Liquids Mount Type : Other, Panel or Surface Mount Outer Size : Approx. 140 mm x 70 mm x 65 mm Finishing : Other, Powder Coated / Painted Thread : G1/4 or 1/4 NPT (as standard) Diameter : Approx. 65 mm (Main body width) Pointer Material : Aluminum Dial Material : Other, ABS Plastic (not externally visible)

Send Inquiry

Mechanical Differential Pressure Switch Accuracy : 2% Scale Range : 20300 Pa Grade : Industrial grade Display : Dial with adjustable pointer Material : Other, Polycarbonate housing Processing Type : Other, Mechanical Seal Material : Rubber Sensor Type : Differential pressure sensor Accessories : Standard mounting accessories included Measure Pressure Of : Other, Air or nonaggressive gases Mount Type : Other, Surface mount Outer Size : Compact design Finishing : Other, White plastic housing Thread : Standard tube connection Pointer Material : Plastic Dial Material : Plastic

Send Inquiry

Electronic differential pressure switch and transmitter DPI Accuracy : 1% F.S. Scale Range : 010 bar (differential) Grade : Industrial Display : Digital LED Material : Other, Aluminum enclosure, sensor ceramic Processing Type : Other, Electronic assembly Seal Material : EPDM rubber Sensor Type : Piezoelectric differential sensor Accessories : Mounting screws, user manual Measure Pressure Of : Other, Liquids and gases Mount Type : Other, Panel Mount Outer Size : 110 mm x 110 mm x 50 mm Finishing : Other, Powder Coated Thread : G1/4 BSP Diameter : 110 mm

Send Inquiry

SEND INQUIRY CALL ME FREE

Type	Factory-set switching points between	Maximum operating pressure
908.32	40 and 200 mbar	10 bar
908.34	150 and 1000 mbar	10 bar