Terminal Block Type Distributor With Isolated Single Output

Product Details:

Resolution 12 bit digital conversion
Connectivity Type Screw Clamp Terminal
Current Range Input/Output: 0-20 mA
Humidity % 10% - 95% (non-condensing)
Application Media Electrical/Instrumentation signals
Temperature Range -20C to +60C
Protection IP20
Share Your Product:

Get a Price/Quote

Request To Call Back Send Inquiry

Terminal Block Type Distributor With Isolated Single Output Product Specifications

Material Flame-retardant Polyamide (PA66)
Resolution 12 bit digital conversion
Connectivity Type Screw Clamp Terminal
Current Range Input/Output: 0-20 mA
Application Media Electrical/Instrumentation signals
Humidity % 10% - 95% (non-condensing)
Power Consumption < 2.5 W
Range Input 0-10V, Output 0-10V (per channel)
Capacity Single isolated output per terminal
Protection IP20
Measurement Range Up to 8 channels, each isolated
Frequency DC signals only
Temperature Range -20C to +60C
Display Type No display
Equipment Type Terminal Block Type Distributor
Power Supply 24V DC (typical)
Accuracy 0.1% of output

Mounting Type DIN Rail Mountable
Status Indicators LED for power and channel status
Operating Voltage Tolerance 10%
Output Type Single Isolated Output
Channel Isolation Each output fully isolated
Housing Color Grey
Wire Size Compatibility 0.2 mm to 2.5 mm (AWG 24-12)
Weight Approx. 150 g
Dimensions (W x H x D) Approx. 100 x 80 x 55 mm

Product Description

Power Requirements

24V DC: 24V DC10%
12V DC: 12V DC20%

Power Sensitivity Better than 0.1% of span for each
power supply range. Power Line Fuse 250mA fuse is installed (standard).

Power Consumption
Power24V DC12V DC
Current Output50mA max.70mA max.
Voltage Output20mA max.25mA max.

INPUT SECTION

Input Resistance1Mmin. with or without power.
Allowable Input Voltage Continuous: 120% of the rated input
value Instantaneous: 1.5 times the rated
input value (within 5 seconds) Crest Factor3 max.
Ranges AvailableWithin the range between 0-10mV AC and 0-300V AC.

Fully Isolated Outputs Per Channel

This terminal block type distributor supports up to 8 channels, each offering full isolation for input and output signals. Isolation enhances safety and signal integrity, preventing interference and ensuring reliable monitoring and control in industrial applications.

Simple DIN Rail Installation

Equipped for DIN rail mounting, installation is swift and secure, fitting seamlessly into control panels. Screw clamp terminals enable quick connectivity for wire sizes between 0.2 and 2.5 mm2, facilitating smooth integration into various setups.

Reliable Status Indication and Protection

LED indicators provide instant feedback on power and channel status, making maintenance and troubleshooting straightforward. Flame-retardant polyamide (PA66) housing and IP20 rated protection shield internal components from accidental contact and environmental factors.

FAQ's of Terminal Block Type Distributor With Isolated Single Output:

Q: How is each output of the Terminal Block Type Distributor isolated?

A: Each output channel is fully isolated through advanced channel isolation, ensuring that electrical or instrumentation signals remain separate and unaffected by other channels, ultimately enhancing safety and signal clarity.

Q: What wire sizes can be used with this distributor?

A: The terminal block accommodates wire sizes from 0.2 mm2 to 2.5 mm2 (AWG 24 to 12), allowing versatile installation with a broad range of compatible cables via screw clamp terminals.

Q: When are the LED indicators activated on the distributor?

A: LED status indicators illuminate to display active power supply and individual channel status, assisting users in rapid identification of operational channels and potential issues during use or maintenance.

Q: Where should the distributor be mounted for optimal performance?

A: For secure and efficient operation, mount the distributor on a standard DIN rail inside a control panel, ensuring protection from excessive dust, moisture, and vibration within the ambient temperature range of -20C to +60C.

Q: What is the process for connecting input and output signals?

A: Connect input signals (0-10V or 0-20 mA) to the respective terminals using suitable wire sizes, and ensure output connections are routed from each channel's isolated terminal, following the provided wiring diagram for correct configuration.

Q: How does the distributor benefit electrical and instrumentation systems?

A: By providing up to 8 fully isolated output channels, users gain enhanced signal integrity and safety in industrial automation, instrumentation, and process control, reducing risk of cross-channel interference and equipment damage.

Tell us about your requirement

Price:

Quantity

Select Unit

50
100
200
250
500
1000+

Additional detail

Mobile number

Other Products in 'Terminal Block Type' category

Terminal Block Type PT Transmitter With Isolated Single Output Sensor Type : 2wire/3wire/4wire PT100 RTD Material : Flame retardant polyamide PA Current Range : Output: 420 mA (Isolated) Power Consumption : < 2 VA Measurement Range : 200C to +600C (depending on RTD) Range : PT100 (RTD) sensor input Power Supply : 24V DC (1836V DC) Connectivity Type : DIN rail terminal block Temperature Range : 10C to +70C (operating) Accuracy : 0.1% of FSR Resolution : Typically 0.01C Humidity % : 0~95% RH, noncondensing Capacity : Single channel Display Type : Other, No display

Send Inquiry

Terminal Block Type CT Transmitter With Isolated Single Output Sensor Type : Current Transformer Material : Plastic Housing Current Range : 05A Power Consumption : Low Power Consumption Measurement Range : 05A Range : 05A Power Supply : 24V DC Connectivity Type : Terminal Block Type Temperature Range : 10C to 60C Accuracy : 0.5% Resolution : High Signal Isolation Frequency : 50/60Hz Humidity % : Up to 95% RH (Noncondensing) Display Type : None, Other

Send Inquiry

Terminal Block Type RTD Temperature Transmitter With Isolated Single Output Sensor Type : RTD (PT100) Material : Plastic enclosure (Black) Current Range : 420mA Power Consumption : Low Measurement Range : PT100 RTD Temperature Range Range : Temperature Range: 200C to 850C Power Supply : 24V DC Connectivity Type : Terminal Block Type Temperature Range : 200C to 850C Accuracy : 0.1% of span Resolution : 0.01C Frequency : 5060Hz Humidity % : 0 to 95% (Noncondensing)

Send Inquiry

Terminal Block Type Potentiometer Transmitter With Isolated Single Output Sensor Type : Isolated Material : Plastic and Metal Current Range : 420mA Power Consumption : Low Measurement Range : Variable Range : Isolated Signal Power Supply : 24V DC Connectivity Type : Terminal Block Temperature Range : 20C to +85C Accuracy : High Frequency : 5060Hz Capacity : Single Output

Send Inquiry

SEND INQUIRY CALL ME FREE