S Type Stainless Steel Pitot Tube is designed specifically for flow measurement

Product Details:

Sensor Type Pitot Tube (S-Type)
Wind Speed Applicable for air velocities
Resolution Dependent on pressure measuring device
Housing Material Stainless Steel
Operating Temperature -20C to +600C (depends on material and version)
Input Direct insertion into flow; no electrical input required
Velocity Range 0.5 to 100 m/s
Share Your Product:

Get a Price/Quote

Request To Call Back Send Inquiry

S Type Stainless Steel Pitot Tube is designed specifically for flow measurement Price And Quantity

Minimum Order Quantity 1 Piece

S Type Stainless Steel Pitot Tube is designed specifically for flow measurement Product Specifications

Resolution Dependent on pressure measuring device
Wind Speed Applicable for air velocities
Operating Temperature -20C to +600C (depends on material and version)
Housing Material Stainless Steel
Sensor Type Pitot Tube (S-Type)
Velocity Range 0.5 to 100 m/s
Input Direct insertion into flow; no electrical input required
Storage Temperature -40C to +700C (material dependent)
Color Silver
Equipment Type Flow Measurement Device
Response Time Instantaneous (depends on connection to manometer/transmitter)
Pressure Range Up to 40 bar (varies by design)
Range Varies by model; typical 0.5 to 100 m/s
Protection Corrosion resistant
Measurement Range 0.5 to 100 m/s (Velocity), 0 to 6000 m3/hr (Flow with converter)
Dimension (L*W*H) As per requirement (Standard lengths 300 mm to 3000 mm)
Connectivity Type Mechanical (tube fittings)
Connecting Type Flanged or Threaded connection
Mounting Insertion Type
Measuring Units m/s, ft/s, m3/hr (with indicator/converter)
Diameter Available in various diameters (commonly 6 mm, 8 mm, 10 mm)
Usage Industrial
Power Supply Not Required (Mechanical Device)
Process Connection Flange, Socket Weld, or Threaded
Accuracy 1% of Full Scale (typical)
Flow Rate Depends on pipe size and velocity
Material SS
Humidity % Suitable for all humidity levels
Temperature Range -20C to +600C
Length 300 mm to 3000 mm (customizable)
Sensitivity High, suitable for low and high velocity measurements
Output Differential Pressure (requires DP transmitter)
Stability High mechanical and measurement stability
Product Type S Type Stainless Steel Pitot Tube is designed specifically for flow measurement
Signal Type Mechanical (Pressure Differential)
Connector Compression fitting, threaded, or flange
Cut Size Customizable as per pipe diameter
Application Media Air, Gas, Steam, Liquid
Model S-Type Stainless Steel Pitot Tube

Calibration Supplied calibrated or as per customer request
Weight Varies according to length and diameter (typically 0.5 to 3 kg)
Surface Treatment Electropolished (optional)
Typical Industries HVAC, Process Industry, Power Plants, Water Treatment, Oil & Gas
Application Features Suitable for dust-laden, particulate, or clean fluids
Working Principle Measures dynamic and static pressure difference to calculate flow
Maintenance Low - Easy to inspect and clean
Installation Orientation Horizontal or vertical installation possible
Accessories Optional mounting brackets, sealing rings, adaptor fittings
Pipe Size Compatibility True insertion type for DN50 and above

S Type Stainless Steel Pitot Tube is designed specifically for flow measurement Trade Information

Supply Ability 10 Piece Per Week
Delivery Time 7 Days

Product Description

Discover the rare efficiency of the S Type Stainless Steel Pitot Tube, an uncommon flow measurement solution built for industrial virtuosos where accuracy and stability are dominant. Utilise offer and take advantage of exclusive discounts with this robust device, engineered for both horizontal and vertical installations. With a mechanical, no-power input design, it provides instantaneous readings across a wide range of applications-even dust-laden or corrosive media. Its electropolished, corrosion-resistant architecture ensures reliability, while customisable sizing and optional accessories suit diverse configurations. Unmatched in versatility and low maintenance, this is the leading choice for precise flow analysis.

Competitive Advantages & Diverse Applications

The S Type Stainless Steel Pitot Tube, a dominant force in flow measurement, excels across HVAC, process industries, power plants, and water treatment facilities. This rare instrument suits both clean and particulate-heavy fluids, making it invaluable for oil & gas, steam, or chemical processing. Its mechanical insertion design is highly adaptable and compatible with a variety of pipe sizes. Uncommon in its accuracy and versatility, it is perfect as a retrofit or for new installations, catering to industrial and process virtuosos alike.

Quick Dispatch and Reliable Transportation

With ready-to-ship S Type Pitot Tubes, we ensure rapid dispatch and secure shipping via dependable transportation partners, guaranteeing your order reaches its destination in perfect condition. Sample availability provides potential clients with firsthand experience of its performance, while our flexible sample policy streamlines trial processes. All shipping adheres to stringent handling standards, safeguarding your products. Take advantage of our prompt logistics support and benefit from seamless order-to-delivery, whether domestic or international, including FOB Port of your choice.

FAQ's of S Type Stainless Steel Pitot Tube is designed specifically for flow measurement:

Q: How is the S Type Stainless Steel Pitot Tube installed?

A: The Pitot tube can be installed horizontally or vertically, depending on your system's configuration. Direct insertion into the flow pipeline is supported, with flanged, threaded, or welded connections available for flexibility during installation.

Q: What competitive advantages does this Pitot Tube offer over other flow measurement devices?

A: This tube boasts high accuracy (typically within 1% of full scale), robust corrosion resistance, and suitability for both clean and particulate-laden fluids. Its design supports low maintenance, high mechanical stability, and customisable lengths and diameters to fit specific pipe sizes and industry requirements.

Q: When should the Pitot Tube be inspected or cleaned?

A: Periodic inspection is recommended, particularly in environments with heavy dust or particulates. The tube has a low-maintenance design that makes it easy to inspect and clean without system shutdown, ensuring long-term operational reliability.

Q: Where can the S Type Stainless Steel Pitot Tube be used most effectively?

A: It's ideal for applications in the HVAC industry, process plants, water treatment, power generation, and oil & gas sectors-essentially any scenario requiring accurate flow measurement for air, gas, steam, or liquid media.

Q: What is the process for ordering samples, and how are products shipped?

A: Samples are available upon request under our flexible sample policy. We ensure quick dispatch and secure shipment of the Pitot Tube through reliable transportation methods, offering FOB at your chosen port for both domestic and international deliveries.

Q: How does using a mechanical (non-electric) design benefit industrial applications?

A: The mechanical operation means no external power supply is needed, increasing safety and reducing potential downtime. This enables deployment in remote or hazardous locations where electrical devices might not be feasible.

Tell us about your requirement

Price:

Quantity

Select Unit

50
100
200
250
500
1000+

Additional detail

Mobile number

Other Products in 'Air Flow And Velocity Transmitter' category

985V Air Flow And Velocity Transmitter Minimum Order Quantity : 1 Connectivity Type : Wired Measurement Range : 0 to 30 m/s Resolution : 0.1 m/s Material : Plastic enclosure, ABS Power Supply : 18 to 30 VAC / VDC Range : 0...10/20/30 m/s selectable Power Consumption : < 2 VA Sensor Type : Thermal anemometer Accuracy : 2% of reading 0.3% FS Display Type : Other, Digital LED Display Temperature Range : 20C to +60C Humidity % : 095% RH (noncondensing) Equipment Type : Air Flow & Velocity Transmitter Wind Speed : Up to 30 m/s Protection : IP65 Application Media : Air and noncorrosive gases Flow Rate : Up to 30 m/s air flow Current Range : 420 mA Diameter : 6 mm connection (typical sensing tube) Response Time : < 1 s (typical) Color : Grey Storage Temperature : 40C to +80C Velocity Range : 0...10/20/30 m/s selectable Operating Temperature : 20C to +60C Model : 985V Load Capacity : Max. 500 (for current output) Mounting : Wall mount or duct mount Connecting Type : Terminal connection Dimension (L*W*H) : 90 x 84 x 39 mm Signal Type : Analog Output : 420 mA, 010 V Process Connection : Tube connector, 6 mm

Send Inquiry

Air Flow And Velocity Transmitter Minimum Order Quantity : 1 Connectivity Type : Wired Measurement Range : 0 to 9999 m3/h Resolution : 0.01 m/s Material : Plastic Housing Power Supply : 24 VAC or VDC, 10 % Range : 050 m/s Power Consumption : less than 1.0 Watt (W) Sensor Type : Differential Pressure Sensor Accuracy : 1 % Display Type : Other, LCD Digital Display Protection : IP65 Application Media : Air, Clean Gases Diameter : Suitable for standard duct sizes Response Time : 1s Color : Grey/White Storage Temperature : 20C to +80C Velocity Range : 050 m/s Operating Temperature : 10C to +60C Model : DPTFlow Load Capacity : Maximum 500 Mounting : Wall or Duct Flange Mount Connecting Type : Cable gland Dimension (L*W*H) : 110 mm x 85 mm x 55 mm Capacity : Highcapacity measurement for HVAC ducts Signal Type : Analog Output : 420mA, 010V selectable Process Connection : Hose Nipple 6mm

Send Inquiry

Air Velocity Transmitter Connectivity Type : 420mA/010V analog output Measurement Range : 0 30 m/s Resolution : 0.1 m/s Material : ABS Housing Power Supply : 24V DC 10% Range : 0 to 30 m/s Power Consumption : Max 2 VA Sensor Type : Hotwire anemometer Accuracy : 3% of reading Display Type : Other, LCD Digital Display Temperature Range : 10C to +60C Humidity % : 0 to 95% RH (noncondensing) Equipment Type : Transmitter Wind Speed : 0 30 m/s Protection : IP65 Application Media : Air, Noncorrosive Gases Flow Rate : Display in m/s or selectable format Current Range : 420mA Diameter : Probe diameter 8 mm Capacity : Industrial Continuous Operation

Send Inquiry

Air Flow Velocity Transmitter 985V Connectivity Type : Analog output (010 V/420 mA) Measurement Range : 0 10 m/s Resolution : 0.01 m/s Material : ABS plastic housing Power Supply : 24 V DC Range : 0 to 10 m/s Power Consumption : Max. 2 W Sensor Type : Hot film anemometer Accuracy : 3% of measuring value Display Type : Other, LCD digital Temperature Range : 10C to +50C Humidity % : 0 to 95% RH Equipment Type : Air Flow Velocity Transmitter Wind Speed : 0 10 m/s Flow Rate : Air velocity (m/s) Current Range : 420 mA

Send Inquiry

SEND INQUIRY CALL ME FREE