Draft differential pressure transmitter PS 17

Product Details:

Thread 1/4 BSP Female
Outer Size 110 mm x 135 mm x 60 mm
Sensor Type Capacitive Pressure Sensor
Display Analog Dial
Seal Material Nitrile Rubber
Bourdon Tube Not Applicable (Diaphragm Sensing Element)
Grade Industrial Grade
Share Your Product:

Get a Price/Quote

Request To Call Back Send Inquiry

Draft differential pressure transmitter PS 17 Product Specifications

Mount Type Wall Mounting
Processing Type Die Cast
Scale Range 0 to 1000 Pa
Glass Size 110 mm
Bourdon Tube Not Applicable (Diaphragm Sensing Element)
Grade Industrial Grade
Dial Material Acrylic
Sensor Type Capacitive Pressure Sensor
Pointer Material Aluminum
Display Analog Dial
Seal Material Nitrile Rubber
Measure Pressure Of Air, Gases (Clean, Non-Corrosive)
Material Aluminum Die Cast Casing
Accuracy 1.5 % FS
Finishing Powder Coated
Accessories Mounting Screws, Instruction Manual
Thread 1/4 BSP Female
Outer Size 110 mm x 135 mm x 60 mm
Diameter 110 mm (Dial Size)

Recommended Use HVAC, Cleanroom, Air Handling Units, Lab Applications
Case Color Light Grey
Zero Adjustment Front Adjustable Knob
Ingress Protection IP54
Temperature Range 0C to 60C
Output Signal No Electrical Output (Mechanical Indication)
Response Time <1 Second

Product Description

Special features

Robust ABS housing with protection class IP 67 for mounting on top-hat rails or a wall (with just 2 screws)
Comes with either a defined measurement range or with the option of alternating between 4 measurement ranges
Adjustable output signal 0/2 10 V or 0/4 20 mA
Adjustable output signal attenuation of up to 10 s
LC display (optional)
Can be calibrated

Measurement ranges (also measurement ranges)
50 / 100 / 200 / 500 Pa
1 / 2.5 / 5 / 10 kPa
others available upon request

optional:
toggles between: 50 Pa / 100 Pa / 200 Pa / 250 Pa
toggles between: 100 Pa / 200 Pa / 750 Pa / 1.25 kPa
toggles between: 250 Pa / 500 Pa / 1 kPa / 2.5 kPa
toggles between: 1 kPa / 2.5 kPa / 5 kPa / 10 kPa
also measurement ranges

Margin of error
1 % of the set value
for measurement ranges 100 Pa plus 0.5 Pa
(at 22 C, 0.3 Pa margin of error for the reference)

Output
0 .. 10 V (R _L 50 k)
2 .. 10 V (R_L 50 k)
0 .. 20 mA (R _L 500 )
4 .. 20 mA (R_L 500 )
(the output signal can be configured using DIP switches)

Power supply
24 VAC/DC 50 / 60Hz 10 % with reverse pole protection
15 .. 32 VDC two-wire
24 VDC with galvanic separation

Contact point (optional, not for two-wire)
1 relay (changeover contacts) max. 230 V AC, 6 A

Display (optional)
3 digits

Durable Design for Demanding Applications

Crafted from aluminum die-cast and finished with a high-quality powder coating, the PS 17 provides lasting durability and protection. The IP54 ingress protection ensures the unit can withstand dust and limited moisture, making it ideal for industrial or laboratory use. Its compact form factor supports easy integration into existing systems.

Precise Mechanical Indication

Utilizing a capacitive sensing element and an analog dial, the PS 17 delivers a rapid response time of less than one second. With its 1.5% FS accuracy, users can rely on consistent, direct pressure readings without electrical output, making it suitable where electric signals are unnecessary or prohibited.

Hassle-Free Installation and Operation

The transmitter features a 1/4 BSP female thread connection and is supplied with mounting screws and a user manual, ensuring straightforward setup. The front-adjustable zero knob simplifies calibration, while the large, clear dial allows easy monitoring at a glance.

FAQ's of Draft differential pressure transmitter PS 17:

Q: How is the Draft Differential Pressure Transmitter PS 17 installed?

A: The PS 17 is designed for wall mounting and comes with all necessary mounting screws. It features a 1/4 BSP female thread for pressure connections, enabling simple and secure installation in HVAC, cleanroom, laboratory, or air handling unit environments.

Q: What type of pressure measurement does the PS 17 provide, and how is it displayed?

A: The transmitter measures differential air or non-corrosive gas pressures from 0 to 1000 Pa using a capacitive diaphragm. Readings are displayed on a large 110 mm analog dial, ensuring quick and precise mechanical indication without any electrical output.

Q: When should I adjust the zero point, and how do I perform this adjustment?

A: Zero adjustment is necessary if the pointer does not return to zero when the device is not pressurized. The PS 17 makes this simple with a front-accessible knob, allowing users to quickly recalibrate the dial to maintain accurate measurements.

Q: Where is the PS 17 typically used?

A: This differential pressure transmitter is commonly used in HVAC systems, cleanrooms, laboratories, and air handling units-anywhere precise, reliable low-pressure measurement for clean, non-corrosive gases is required in an industrial setting.

Q: What is the benefit of a mechanical (non-electrical) output in this transmitter?

A: The lack of electrical output eliminates potential interference or risk in electrically sensitive environments and ensures uninterrupted, direct visual monitoring. This design is ideal in applications where only local pressure indication is necessary.

Q: How does the PS 17 maintain durability in industrial environments?

A: Featuring an aluminum die-cast casing with powder coating and an IP54 rating, the PS 17 is resistant to dust ingress and splashed water, prolonging its lifespan in demanding industrial or laboratory environments.

Tell us about your requirement

Price:

Quantity

Select Unit

50
100
200
250
500
1000+

Additional detail

Mobile number

Other Products in 'Draft Pressure Transmitter' category

Draft pressure transmitter PU-PI Finishing : Other, Powder Coated Display : Analog Sensor Type : Pressure Transmitter Pointer Material : Other, Black Anodized Aluminium Seal Material : Neoprene Rubber Measure Pressure Of : Other, Draft/Low Air Pressure Material : Other, MS (Mild Steel) Accuracy : 1% of FS Mount Type : Other, Bottom Connection Processing Type : Standard Scale Range : 0 to 600 mm WC Bourdon Tube : Yes Grade : Industrial Dial Material : Other, Aluminium Thread : 1/2 BSP Outer Size : 110 mm Diameter : 100 mm Accessories : Mounting bracket included

Send Inquiry

Draft pressure transmitter P 26 Finishing : Other, Powder Coated / Stainless Steel Polished Display : Digital LCD/LED Sensor Type : Piezoresistive Micromechanical Sensor Pointer Material : Other, Not Applicable; Digital Display Seal Material : Silicone / EPDM Measure Pressure Of : Other, Air and Noncorrosive Gases Material : Other, Stainless Steel / ABS Plastic Body Accuracy : 1% FS Mount Type : Other, Panel / Wall Mount Processing Type : Other, CNC Machined Scale Range : 0 to 1000 Pa (custom ranges available) Bourdon Tube : Not Applicable for this model Grade : Industrial Grade Dial Material : Other, Not Applicable; Digital Display Thread : G1/4 (Standard), others on request Outer Size : 80 mm (approximate body diameter) Diameter : 80 mm main body Accessories : Mounting brackets, electrical connector

Send Inquiry

PU-PI Draft Pressure Transmitter Minimum Order Quantity : 1 Finishing : Polished Display : Digital Usage : Industrial Color : White Product Type : PUPI Draft Pressure Transmitter Size : Standard

Send Inquiry

PS17 Draft Pressure Transmitter Minimum Order Quantity : 1 Finishing : Polished Display : Digital Usage : Industrial Color : White Product Type : PS17 Draft Pressure Transmitter Size : Standard

Send Inquiry

SEND INQUIRY CALL ME FREE