Positioning system PSE

Product Details:

Humidity % 10% to 90% non-condensing
Measurement Range 0.01 mm to 500 mm
Diameter Up to 100 mm
Application Media Solid and Metallic Parts
Protection IP54
Frequency 50/60 Hz
Resolution 0.01 mm
Share Your Product:

Get a Price/Quote

Request To Call Back Send Inquiry

Positioning system PSE Product Specifications

Capacity Single or Multi-part
Temperature Range 0C to 50C
Connectivity Type RS232/USB
Accuracy 0.01 mm
Resolution 0.01 mm
Power Supply 220-240V AC, 50/60Hz
Sensor Type Photoelectric/Encoder
Measurement Range 0.01 mm to 500 mm
Display Type Digital LCD
Range 0-500 mm
Humidity % 10% to 90% non-condensing
Material Aluminum Alloy
Frequency 50/60 Hz
Diameter Up to 100 mm
Power Consumption Less than 15 W
Application Media Solid and Metallic Parts
Protection IP54

Product Description

Special features

Space-saving, compact design
Galvanically separated supply voltages for control and performance electronics
Durable EC-motor
Extremely accurate positioning due to measurement of the position at the output side
Easy and low-cost mounting via hollow shaft
Bus interfaces simplify start-up and wiring complexity
Address may be set using the bus or an address switch (not for IO-Link)
Baud rate set via switch
Status messages retrievable via bus

Nominal torque / Nominal rated speed

PSE 311-14: 1 Nm / 210 rpm
PSE 312-14: 2 Nm / 115 rpm
PSE 332-14: 2 Nm / 150 rpm
PSE 335-14: 5 Nm / 68 rpm
PSE 3310-14: 10 Nm / 25 rpm
PSE 3325-14: 25 Nm / 10 rpm

Data interface

CANopen, PROFIBUS DP, DeviceNet, Modbus RTU,
Sercos, EtherCAT, PROFINET, EtherNet/IP, POWERLINK, IO-Link

Positioning accuracy

0.9°

Output shaft

14 mm hollow shaft with adjustable collar

Positioning range

250 rotations, not subject to mechanical limits

Supply voltage

24 VDC

Protection class

IP 54

Dual Operating Modes for Flexible Control

The PSE Positioning System allows users to switch between manual and automatic operation, catering to diverse application needs. Manual mode provides direct control for adjustments, while automatic mode ensures consistent, repeatable positioning, crucial for high-precision tasks.

Wide Range and Exceptional Accuracy

Engineered for precision, the PSE offers a measurement range from 0.01 mm up to 500 mm, accommodating parts with diameters up to 100 mm. Its high accuracy of 0.01 mm and repeatability make it suitable for tasks requiring detailed manipulation and measurement.

Simplified Integration and Enhanced Connectivity

Users benefit from seamless integration via RS232/USB interfaces and compatibility with Windows-based software, enabling efficient data transfer and control. The 2-meter standard cable increases flexibility in equipment setup, whether tabletop or built-in.

FAQ's of Positioning system PSE:

Q: How does the Positioning System PSE operate in both manual and automatic modes?

A: The PSE allows users to select manual mode for direct, hands-on adjustments or switch to automatic mode for pre-programmed, precise positioning. This flexibility ensures that operators can choose the most appropriate control method for their application.

Q: What type of data outputs does the Positioning System PSE offer?

A: This system provides both digital and analog data outputs, facilitating diverse integration needs with other monitoring or control devices. Data can be extracted via RS232 or USB connectivity for further analysis.

Q: When is calibration required for this positioning system?

A: The PSE comes factory calibrated, meaning it is ready for immediate use upon installation. Periodic calibration might be performed as part of routine maintenance, depending on operational demands and industry standards.

Q: Where is the PSE Positioning System typically mounted?

A: The system can be mounted either as a tabletop unit or built into existing machinery or workstations, depending on space and application requirements. Its compact design and standard cable length support flexible installation options.

Q: What is the process for integrating the system with Windows-based software?

A: Integration is straightforward thanks to native Windows compatibility and standard RS232/USB connectivity. Users simply connect the device to their computer and follow the software setup prompts for immediate operational control and data management.

Q: What are the key benefits of using the PSE Positioning System?

A: Key benefits include high measurement accuracy, repeatability, versatile mounting, robust IP54 protection, and flexible connectivity. These features enhance productivity and reliability in handling solid and metallic parts in precision environments.

Tell us about your requirement

Price:

Quantity

Select Unit

50
100
200
250
500
1000+

Additional detail

Mobile number

Other Products in 'Other Positioning Systems' category

Positioning system PSE Sensor Type : Optical Encoder Power Supply : 24V DC Temperature Range : 10C to +60C Connectivity Type : RS232, 420mA Output Resolution : 0.01 mm Accuracy : 0.1 mm Power Consumption : 10 W Humidity % : 095% RH (noncondensing) Material : Aluminium Alloy Range : 0 1000 mm Equipment Type : Positioning System Diameter : 50 mm Application Media : Positional Feedback Applications Protection : IP65 Measurement Range : 0 1000 mm Display Type : Other, Digital LCD

Send Inquiry

Positioning system PSE Sensor Type : Position Sensor Power Supply : 24V DC Temperature Range : 10C to +60C Connectivity Type : RS232/RS485 Resolution : 0.01 mm Accuracy : 0.1 mm Power Consumption : Max 3W Humidity % : 5% to 95% noncondensing Material : Aluminum Housing Range : 0200 mm Equipment Type : Positioning System Diameter : 25 mm Application Media : Industrial Automation Protection : IP65 Measurement Range : 0 to 200 mm Display Type : Other, Digital LCD

Send Inquiry

Positioning system PSE Sensor Type : Position Sensor Power Supply : 1224V DC Temperature Range : 10C to 50C Connectivity Type : Wired Resolution : 1 mm Accuracy : High Power Consumption : Low Humidity % : Up to 90% RH Material : Plastic Range : Up to 10 meters

Send Inquiry

SEND INQUIRY CALL ME FREE