Differential pressure transmitter, 985

Differential pressure transmitter, 985

Product Details:

  • Accuracy +-0.5% FS,min. +-1 Pa %
  • Voltage 18...30 VAC / VDC Volt (v)
  • Operate Method Electrical
  • Material ABS
  • Pressure -50 Pa to 1 Bar
  • Application HVAC , Bag filter , building automation
  • Usage measuring pressure in neutral fluids and non-aggressive gases.
8500.00 INR/Piece
X

Price And Quantity

  • 8500.00 INR/Piece
  • 1 Piece

Product Specifications

  • ABS
  • Electrical
  • 18...30 VAC / VDC Volt (v)
  • +-0.5% FS,min. +-1 Pa %
  • 125 g Grams (g)
  • 81 x 83 x 41 mm Millimeter (mm)
  • measuring pressure in neutral fluids and non-aggressive gases.
  • HVAC , Bag filter , building automation
  • -50 Pa to 1 Bar
  • white
  • differential pressure detection in gas

Trade Information

  • All India
  • CE Conformance acc. to EN 61326 RoHS Conformance acc. to 2011/65/EU

Product Description

The differential pressure transmitters of the 985 series are used to measure differential pressure, overpressure and vacuum. They provide up to 8 pressure ranges and 2 output signals, which are easily selectable by jumper or rotary selector switch. Monitoring of gaseous, non-combustible and non-aggressive media.

Applications: Monitoring of gaseous, non-combustible and non-aggressive media. Possible usage areas are:
- BMS and HVAC systems 
- Inside Pressure Measuring on Industrial Boilers, Furnaces and Dryers
- Bag-filter pressure monitoring
- Kiln draft pressure monitoring
Features:
~Setting ranges: Depending on type between -100 Pa and 1 bar

~Configurable pressure range: For an optimum adaptation to the application, the transmittercan be switched between various pressure ranges. The factorysetting is the most sensitive range. For the series 985M and 985A the less sensitive second range will be selected by simplyremoving a jumper. For the series 985Q the available eightranges can be selected by a rotary selector switch.

~Output signal selection:The output signal of the 3-wire version can be changed between 0 -10 Volt and 4-20 mA by removing a jumper.The series 985M is also available in a 2-wire version with 4-20 mA output signal.

~Configurable response time:The response time of the output signal can be configured using a jumper. If the jumper is in place the response time is slow (factory setting), which is useful for suppressing brief pressure peaks. If the application requires a fast response time the jumper must be removed.

~Easy offset calibration:The output signal of the 985M series can be calibrated to zero by pressing the MODE/Offset button in a pressureless state of the transmitter. The series 985A and 985Q perform an automated zero offset compensation.

 

Specification

Electrical Connection

Plug-In Terminals For Wires And Strands Up To 1.5 Mm2 Or Circular Connectors M12 / 4-Pole

Range

-100 Pa to 1 Bar

Usage/Application

Monitoring of gaseous, non-combustible and non-aggressive media.

Display Type

Red; 4 digits,LED

Brand

Beck GmbH

Process Temperature

-20 ... 70 Degree C

Accuracy

+-0.5% FS,min. +-1 Pa

Analog Output

0 ...10 Volt and 4 ... 20 mA

Model Name/Number

985

Supply Voltage

18 to 30 VAC / VDC

Protection Class

IP65 acc. to EN 60529

 


PARSHVI TECHNOLOGY (INDIA) PRIVATE LIMITED

* Tips on getting accurate quotes. Please include product name, order quantity, usage, special requests if any in your inquiry.



Back to top
PARSHVI TECHNOLOGY (INDIA) PRIVATE LIMITED All Rights Reserved.(Terms of Use)
Developed and Managed by Infocom Network Ltd.(Terms of Use)
Developed and Managed by Infocom Network Ltd.